MultiMat
This new revolutionary engraving table hold down mat makes your engraving jobs easier and faster
MultiMat is a double sided mat which can be
applied to virtually any engraving table top to provide a stable, self
sticking surface to practically any flat engraving material.
MultiMat is a durable rubber like material with a rigid core that has
special holding properties. Engraving material will not move from side
to side, but after engraving can be aasily lifted.
This amazing product can be used over and over again and cleans with the
most common cleaner in the world - water! No special chemicals or
cleaner is required.
- MultiMat offers double the value as both sides of the mat are usable
- MultiMat is easy to use - just press it into place on any size engraving table and it’s ready to go
- No more problems with difficult to hold engraving material. Perfect for brass, aluminium, flexible materials like IPI, acrylic, rigid materials like Traffolyte, etc.
- MultiMat can be used on laser engraving systems to keep warped or thin materials flat while being processed.
- MultiMat does away with the need for double sided tape, vacuum tables and other expensive time consuming methods to hold materials down. Also eliminates nearly all the need for clamps.
- MultiMat is easily rejuvenated by merely cleaning with running water and a soft sponge!
Start saving
production time today
Call now to order, Sydney 9584 9499
Frequently Asked
Questions About MultiMat
How long will MultiMat last?
The life span of MultiMat depends on many factors, including the type of
use, cleaning and handling. The average user can expect many months or
even years of use. One great advantage is that MultiMat is double sided
and therefore the life span can be double compared to a single sided
product.
How can I clean multimat?
Cleaning MultiMat is simple and easy. Just use a soft sponge and running
water to remove chips, dust or dirt then allow to dry. No chemicals or
cleaners are required.
How is MultiMat affixed to the engraving table top?
No double sided tapes, vacuums or clamps are needed and MultiMat can be
easily removed and stored for later use. It can then be re-installed by
placing it in position and gently pressing down. No other hold down
system is so fast and easy to use.
What happens if I engrave through the engraving material and into
MultiMat?
MultiMat has a self healing feature. Small cuts in the surface of
MultiMat should not cause a problem and even seem to heal. Of course
continued cuts over a long period of time will degrade the effectiveness
of MultiMat.
How is MultiMat sold?
LST sell Multimat in standard sheet sizes of:
-
1200mm x 600mm
-
600mm x 600mm
-
600mm x 300mm
-
300mm x 300mm
It can be cut to size with a standard plastic shear. Some users will cut the mat to fit their table size. Others prefer to cut their MultiMat into several equal sheets corresponding to the size of plate or materials they most often engrave. They use one, and keep the others in reserve.
